![]() The variables which can be set are as follows: -airport, -runway, and -offset-distance. Setting the variable will override the default takeoff location. Takeoff location in SITL FlightGear can be set using additional variables. In FlightGear you can display the frame rate by enabling it in: View > View Options > Show frame rate. FG\_ARGS\_EX - any additional FG parameters.FG\_MODELS\_DIR - absolute path to the folder containing the manually-downloaded aircraft models which should be used for simulation.FG\_BINARY - absolute path to FG binary to run.You can tune your FG installation/settings by the following environment variables: You can bring it into the air by typing: pxh> commander takeoff You can change the view by pressing Ctrl+V. Once there is an INFO print that is commencing GPS fusion the vehicle is ready to arm.Īt this point, you should see a FlightGear window with some view of aircraft. The console will print out status as PX4 loads the airframe-specific initialization and parameter files, wait for (and connect to) the simulator. Now checking for plug-in osgPlugins-3.4.1/osgdb_nvtt.so Pxh> StatsHandler::StatsHandler() Setting up GL2 compatible shaders INFO Startup script returned successfully INFO MAVLink only on localhost (set param MAV_BROADCAST = 1 to enable network) INFO mode: Onboard, data rate: 4000 B/s on udp port 14280 remote port 14030 INFO mode: Onboard, data rate: 4000000 B/s on udp port 14580 remote port 14540 INFO mode: Normal, data rate: 4000000 B/s on udp port 18570 remote port 14550 INFO Mixer: etc/mixers-sitl/plane_ on /dev/pwm_output0 INFO Simulator connected on TCP port 4560. INFO Waiting for simulator to accept connection on TCP port 4560 INFO Unknown restart, data manager file './dataman' size is 11798680 bytes Targed Bridge Freq: 200, send data every step: 1 INFO selected parameter default file eeprom/parameters_1034 INFO Calling startup script: /bin/sh etc/init.d-posix/rcS 0 You must select enter to get the command prompt. Once the PX4 has started it will launch the PX4 shell as shown below. The make commands mentioned above first build PX4 and then run it along with the FlightGear simulator. The Installing Files and Code guide is a useful reference if there are build errors. QGroundControl should be able to automatically connect to the simulated vehicle.įor the full list of FlightGear build targets (highlighted) run: make px4_sitl_nolockstep list_vmd_make_targets | grep flightgear_įor additional information see: FlightGear Vehicles (this includes information about "unsupported" vehicles, and adding new vehicles). The commands above launch a single vehicle with the full UI. Make px4_sitl_nolockstep flightgear_tf-g1 Make px4_sitl_nolockstep flightgear_tf-r1 The supported vehicles and make commands are listed below (click on the links to see the vehicle images). Make px4_sitl_nolockstep flightgear_rascal The easiest way to do this is to open a terminal in the root directory of the PX4 Firmware repository and call make for the desired target.įor example, to start a plane simulation : cd /path/to/Firmware Run a simulation by starting PX4 SITL, specifying the airframe configuration of your choice. Setting the permissions is required because the PX4-FlightGear-Bridge puts the communication definition file here.Īdditional installation instructions can be found on FlightGear wiki. ![]() Set write permissions to the Protocols folder in the FlightGear installation directory: sudo chmod a+w /usr/share/games/flightgear/Protocols.those with electric engines) the daily build with the newest features may be necessary.Ĭheck that you are able to run FlightGear: fgfs -launcher This installs the latest stable FlightGear version from the PAA repository along with the the FGdata package.įor some models (e.g. Install FlightGear: sudo add-apt-repository ppa:saiarcot895/flightgear ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |